manualshive.com logo in svg

Nexsan Nexsan Unity, Hardware Maintenance Manual, Page: 2 / 76

Share
Download
Nexsan Nexsan Unity Hardware Maintenance Manual Download Page 2

Copyright © 2010—2018 Nexsan Technologies, Inc. All rights reserved.

Trademarks

Nexsan® is a trademark or registered trademark of Nexsan Technologies, Inc. The Nexsan logo is a registered trademark of Nexsan Technologies, Inc.

All other trademarks and registered trademarks are the property of their respective owners.

Patents

This product is protected by one or more of the following patents, and other pending patent applications worldwide:

United States patents US8,191,841, US8,120,922;

United Kingdom patents GB2466535B, GB2467622B, GB2467404B, GB2296798B, GB2297636B

About this document

Unauthorized use, duplication, or modification of this document in whole or in part without the written consent of Nexsan Corporation is strictly
prohibited.

Nexsan Technologies, Inc. reserves the right to make changes to this manual, as well as the equipment and software described in this manual,
at any time without notice. This manual may contain links to Web sites that were current at the time of publication, but have since been moved
or become inactive. It may also contain links to sites owned and operated by third parties. Nexsan is not responsible for the content of any such
third-party site.

Summary of Contents for Nexsan Unity













































































Reviews:

No comments