neuroConn DC-Stimulator, User Manual, Page: 51 / 85

Chapter 5 - Software Reference Manual
51
Completing the study
To finish the study switch the DC- STIMULATOR on. The display will immediately switch to
limited selection of settings (Figure 30). Press button 2 and enter the mastercode as
described in Software Reference Manual: MASTERCODE.
Confirm with button 4 (OK). You will no get back to main menu PARAMETER. To disable the
study mode proceed as described in Software Reference Manual: Enabling study mode.
After next reboot the DC-
STIMULATOR will start in the standard operating mode.
After disabling the study mode you have to reboot the DC- STIMULATOR (switch
off and switch on the device). Without reboot the standard operation mode will not
work correctly.
Language set
You can operate the DC- STIMULATOR in German or English language. The language can
be adjusted in this submenu.
To change the language settings please follow these instructions:
- Press button 2 or 4 to select main menu SYSTEM. Move the cursor to line 2 on the
display by pressing button 3.
- Switch to submenu language set by pressing button 2 or 4 several times. Move the cursor
to line 4 on the display by pressing button 3 (Figure 32).
- Press button 2 or 4 to confirm "change". Thereafter you can choose between "deutsch"
and "english" by pressing button 2 (Figure 33).
- Press button 4 (OK) to activate the language setting.
- Press button 1 several times to move the cursor back to line 1 (the main menu).
Figure 32: Main menu SYSTEM, submenu language set Figure 33: Main menu SYSTEM submenu language set:
english