neuroConn DC-Stimulator, User Manual, Page: 39 / 85

Chapter 5 - Software Reference Manual
39
Figure 20: Description of the display of the DC-STIMULATOR
The button's functionality depends on displayed menu and is symbolized through an icon
near the display's corner. If there is no icon then the corresponding button has no function in
this menu.
Use buttons 1 and 3 on the left for moving the cursor up and down in order to reach different
menus or values. Use buttons 2 and 4 on the right for changing menus or values at the
cursor position.
At the display's left side the battery charge condition is displayed. A white filled battery
symbolizes full charged battery. If the battery symbol is blinking, the batteries need to be
charged before the DC-
STIMULATOR is used further (see Manual: External charger for
details).
A blank loudspeaker symbol indicates that the signal tone of the DC- STIMULATOR (for
warnings and notices) is not active. After activating the signal tone (see Software Reference
Manual: Signal tone) the symbol is filled white.
The user can save parameters into 4 different configurations, the so called settings A-D. The
active setting is shown in the display beside the battery symbol. It's parameter will be
recalled as initial settings at the next start up. For details on loading and saving settings see
Software Reference Manual: Load setting.
The following chapters of this manual are arranged according to the main menus
(PARAMETER, STIMULATION and SYSTEM) and the corresponding submenus.
To open a main menu the cursor has to be in the first line of the display. Push button 2 or 4
until you achieve the desired main menu.