neuroConn DC-Stimulator, User Manual, Page: 16 / 85

Chapter 3 - Getting Started
16
Getting Started 3
General conditions
Before using the DC- STIMULATOR , please read the following advice to make sure a proper
environment is provided:
- The room temperature should be between 10 and 40 °C (50 and 104 °F) and the air
humidity should be between 20 and 93 % (non condensing). The air pressure must be
between 690 and 1080 hPa (3000 m).
- Keep the system away from direct sunlight, heat sources, liquids or corrosive chemicals.
- Keep the system away from magnetic objects. It can be damaged by too strong magnetic
fields.
- Keep the system away from strong electric or electromagnetic fields.
If the device has been exposed to low temperatures or to drastic temperature
fluctuation (e.g. during transport), the resulting condensation might damage the
device. For safety reasons, wait until the DC-
STIMULATOR has reached room
temperature (at least 1 hour) before using the device. The manufacturer accepts
no responsibility for any injury caused by insufficient acclimatization of the device.
The DC- STIMULATOR is suitable for mobile use and can be carried carefully around within
the range of its attached cables, even whilst in operation.
Components
The following instructions refer to the DC- STIMULATOR equipped with all
options. Depending on the specification of your DC- STIMULATOR some of the
sockets / components might not be available on the system.
You must not connect any devices / components / cables, that are not described
in this manual or that are not part of the delivery, to the inputs or outputs of the
system.