neuroConn DC-Stimulator, User Manual

Page: 35 / 85

Chapter 4 - Operating Basics
35
Moving the device
Switch off the DC- STIMULATOR and disconnect all connecting cables. Usually, the DC-
STIMULATOR comes in a plastic shipping case cushioned with foam, thus ensuring safe
and reliable shipment. Room temperature should be between 10 and 40 °C (50 and 104 °F)
and the air humidity should be between 20 to 93 % (non condensing). The air pressure must
be between 690 to 1080 hPa (3000 m).
If the device has been exposed to low temperatures or to drastic temperature
fluctuation (e.g. during transport), any resulting condensation could damage the
device. For safety reasons, do not operate the DC-
STIMULATOR until is has
reached room temperature (at least 1 hour). The manufacturer accepts no
responsibility for any injury caused by insufficient acclimatization of the device.