neuroConn DC-Stimulator, User Manual

Page: 27 / 85

Chapter 4 - Operating Basics
27
Operating Basics 4
External charger
The DC- STIMULATOR front plate can be moved because of the necessary change
between the two operating modes “Charge” and “Stimulation” (see Figure 10 and Figure 11).
Figure 10: Front plate in "Charge" position Figure 11: Pushing into "Stimulation" position
For safety reasons, never use electrodes and charger at the same time. Take
care of the operative front plate to avoid such a circumstance. Never remove the
front plate. The manufacturer accepts no responsibility for injury caused by this.
Whilst the front plate is in the “Stimulation” position, the electrodes and the external trigger
(optional - see Manual: Trigger input) can be put into the sockets. Hold the connector, not the
cable, whilst plugging it into the sockets (see Figure 12 and Figure 13).
Figure 12: Plug the electrode into the socket Figure 13: Connected electrodes