neuroConn DC-Stimulator, User Manual

Page: 20 / 85

Chapter 3 - Getting Started
20
Equipment
Adapter box TRIGGER IN
This adapter box is a module for connecting external trigger sources to the DC-
STIMULATOR . It consists of the following components:
Figure 5: Adapter box TRIGGER IN
1 adapter box
2 BNC socket
3 touch-protected connecting cable ø 2 mm
to plug in into socket 4 (signal) of the DC-
STIMULATOR
4 touch-protected connecting cable ø 2 mm
to plug in into socket 3 (ground) of the DC-
STIMULATOR
Consumables
Starter set
The rubber electrodes und sponge pads of the starter set are available in different sizes. The
standard starter set contains rubber electrodes 5 x 7 cm (35 cm
2
) and the appendant
sponge pads.