Network Electronics SDI-IP-GTW, User Manual

Page: 66 / 82

SDI-IP-GTW User Manual
66
Step Action If the result of action is Yes... If the result of action is
No...
1 Check Fan
Rotation.
Inspect the fans
located at the
sides of the unit.
Are the fans
rotating? Check that the Video Gateway
has been installed with sufficient
space allowed enclosure for air
flow. If the air is too hot,
additional cooling may be
required. Possible break in the dc
supply from the PSU module
to the suspect fan(s). Call a
Service Engineer.
5.4.5 Alarm LED lit / Alarm condition
The alarm LED on front and rear will light when a critical alarm occurs.
For a list of possible alarms and the causes, please refer to Table 11.
Alarms.
The description of the severity levels of the different alarms are given in
Section 4.2.5.
5.5 Disposing of this Equipment
5.5.1 General
Dispose this equipment safely at the end of its life time, Local codes
and/or environmental restrictions may affect its disposal. Regulations,
policies and/or environmental restrictions differ throughout the world
and they might have changed since you acquired this equipment.
Please contact your local jurisdiction or local authority for specific
advice on disposal.
5.6 To return the unit
Before shipping the SDI-IP-GTW to Network Electronics, contact your
local Network Electronics reseller or Network Electronics directly for
additional details.
•
Write the following information on a tag and attach it to the SDI-
IP-GTW.
o
Name and address of the owner
o
Model number
o
Serial number
o
Description of service required or failure indication
•
Package the SDI-IP-GTW.
o
You can use the original shipping containers or adequate other
packing containers
•
Seal the shipping container securely, and mark it FRAGILE.