Network Electronics SDI-IP-GTW, User Manual

Page: 47 / 82

SDI-IP-GTW User Manual
47
3.7 IP RX
3.7.1 Main
Figure 23 shows the IP RX page. The purpose of this page is to provide
an interface for configuring the receive parameters for the SDI output
stream.
Figure 23. IP RX page
The left part of screen shows a tree containing all the SDI output ports.
Only one SDI stream can be received for the current version of the SDI-
IP-GTW. The information to the right of the page is related to the
selected stream.
3.7.1.1 Output Configuration
Enable output:
Tick this box to enable the SDI output. If this is not
ticked, you will not send any SDI stream on this output. The output
port will be grey in the status view.
Output name:
Enter a name reference this SDI output stream.
Default format:
Select default output format. This will be the output
format when the box starts and when no input signal is present.
Video loss output:
Select what to display on the output when the input
signal disappears. The options are black screen, grey screen or the last
picture frozen.