Network Electronics SDI-IP-GTW, User Manual

Page: 13 / 82

SDI-IP-GTW User Manual
13
5. Ethernet data port . The SDI-IP-GTW provides one Ethernet data
port for high speed signal transmission and reception.
6. Alarm/RS232 Connector . This 9-pin male DSub connector provides
RS232 access and alarm information.
7. Technical Earth . The SDI-IP-GTW provide a Technical Earth.
8. Mains Power Connection . This is the Power Supply Connection.
9. LEDs . The SDI-IP-GTW provides on the rear four LEDs related to the
operation of the equipment. In addition, there are LEDs related to the
SDI ports, the management port and the data port.
1.5.4 Construction
The SDI-IP-GTW SDI to IP Video Gateway consists of a main board and
an SDI board mounted horizontally in a screened cabinet. The unit is
1RU high and two units can be mounted side-by-side in a 19 inch rack.
All inputs and outputs are available at rear panel and there are no
front panel keypads or display. Figure 3 shows the rear panel of the
unit.
Figure 3. Rear view
1.5.5 Hardware Options
1.5.5.1 SFP Module
As a factory option, the SDI-IP-GTW can be equipped with an SFP slot
to feature optical Gigabit or a second, redundant electrical Gigabit port.
The SFP module itself is not provided.
1.5.6 Software Options
The following table describes the features available as software option.
Please refer to