Network Electronics SDI-IP-GTW, User Manual

Page: 49 / 82

SDI-IP-GTW User Manual
49
3.7.1.5 IP RX Status
Locked: Indicates "Yes" when the unit has locked to the input stream
and is currently playing out a valid SDI stream.
Total rate:
The total IP rate received on this channel.
Current buffer fill:
Shows the number of bytes currently in the buffer.
Latency:
This parameter reflects the current latency in the unit. This
value is directly dependent on the current buffer fill.
RTP sequence errors:
A counter showing the number of RTP sequence
errors caused by lost packets or out-of-order packets. A value of zero
indicates that all packets are received in order.
Lost IP frames: A counter showing the number of IP frames that is lost,
i.e. lost and not corrected by the unit.
Corrected IP frames:
A counter showing the number of IP frames that
are corrected by the unit.
Reset statistics:
Press this button to reset the counters: Skipped
frames, Repeated frames, RTP sequence errors and Lost IP frames.
3.7.2 FEC Settings
Figure 24. The FEC sub-page of an IP receiver
This sub-page will only appear if the unit is enabled with FEC .