Network Electronics SDI-IP-GTW, User Manual

Page: 35 / 82

SDI-IP-GTW User Manual
35
Figure 15. Alarm sub-page
In order to change the severity level of an alarm event, select the alarm
event in the left table and the selected event will appear in the "Filter
Settings" frame. Select the severity level (Filtered, Warning or Critical)
from the list and press "Apply Filter Change" to change the severity
level. The severity level is reflected in the user interface and in the
SNMP traps sent by the unit.
The default severity level is shown in the "Default Sev." column and the
current severity level if different from default is shown in the
"Overridden Sev." column.
3.5.4 SNMP
The SNMP page is used to add destination servers for SNMP trap messages.