Network Electronics SDI-IP-GTW, User Manual

Page: 72 / 82

SDI-IP-GTW User Manual
72
B.3 Ethernet management port
Table 17. Ethernet Management Port Specification
Item Specification
Type 10/100Base-T
Connector type RJ45
Safety status (UK) SELV
B.4 Alarm relay and maintenance port specification
Table 18. Alarm Relay and Maintenance Port Specification
Item Specification
Connector type 9-pin DSUB Male
RS232 baudrate 115,2 kbaud
RS232 framing 8 bit, no parity, 1 stop bit
RS232 handshake None
Relay rating 0.1 A max, 50 Vdc max
Relay minimum load 10 µA at 10 mVdc
Pins 1. NC
2. RS232 Receive Data (input)
3. RS232 Transmit Data (output)
4. NC
5. Ground
6. Alarm on
7. Alarm relay common
8. Alarm off
9. NC
Safety status (UK) SELV
B.5 AC Mains Input
Table 19. AC Power Supply Specification
Item Specification
Rated voltage 100-240Vac
Voltage tolerance limits 90-264 Vac
Rated frequency 50/60 Hz
Rated current 0.7 A
Power consumption < 50 W
B.6 Physical Details
Table 20. Physical details
Item Specification
Height 43 mm, 1U
Width 222 mm excluding fixing brackets