Netscout aircheck G2 User Manual Download Page 97

Page: 97 / 141

Conducting iPerf Performance Testing

TCP only Results

Avg. Up Speed:

The network's average upload rate.

Max Up Speed:

The network's maximum upload rate.

Avg. Down Speed:

The network's average download rate.

Max Down Speed:

The network's maximum download rate.

NOTE:

This icon indicates that the hardware may be

limiting the maximum speed measurement.

UDP only Results

Upload Speed:

The network's average upload rate.

Upload Jitter:

The network's measured upload jitter.

Upload Loss:

The percentage of packets being lost during

upload.

Download Speed:

The network's measured download rate.

Download Jitter:

The network's measured download jitter.

Download Loss:

The percentage of packets being lost during

download.

Summary of Contents for aircheck G2














































































































































Search results

Summary of Contents for aircheck G2

Reviews:

Brands by name

Popular brands

Netscout aircheck G2, User Manual

Search results

Summary of Contents for aircheck G2

Reviews:

Brands by name

Popular brands