Verifying Connectivity and Coverage
57
Figure 37. Settings > Test Targets Screen
2
Select
Test Targets,
and then, touch
Add Test Target.
3
Touch
Target
to enter an IP address or host name. Select
either the
URL Keyboard
or I
Pv4 Address Keyboard
, and
type in the address. (In
www.netscout.com.)
Figure 38. Configure Target Screen
4
Touch
DONE
.
5
Choose a
Test Type
:
ICMP Ping
or
TCP Port Open
. Touch
the down arrow
to switch between them.
NOTES:
If you specify a Ping test to a web server target
that does not respond to Ping requests, the test may fail
even if the target is reachable.
The default test type is ICMP Ping. If you select TCP Port
Open, then you may change the default Port by touching,
Port
to open the TCP Port screen, and entering the TCP
port number.
6
Touch
Apply
to add the test target.
7
Touch
Apply
again on the Test Targets screen.
NOTE:
When you add a test target in
Settings > Test
Targets
, the target is automatically added to
AutoTest
and
Connect to Network/AP
tests. See
.
