Locating an Access Point, Client, or Interferer
67
increases (i.e., as you are moving closer to the AP). The sound
icon displays in the screen header when sound is On.
External Antenna Icon:
Press this button
to turn the
External Antenna on or off. The external antenna is On when
the icon displays in the screen header, as shown in
.
The Locate Client Screen
The following information shows on the
Locate Client
screen:
Screen Title:
Shows the Client’s MAC address. The address
starts with a vendor abbreviation prefix, if the prefix is
available.
See “How to: Load the latest list of vendor
prefixes into the Tester,” page 89.
MAC Address:
The client’s MAC address.
Last Seen:
The time elapsed since the client was last
detected.
Signal Strength Meter:
Visually displays the client’s real-time
signal level reading.
Figure 47. Locate Client Screen
