NETLink PRO ETH
15
This completes parameterization of the driver.
It may now be necessary to adapt the NETLink PRO ETH to the situation in
the existing TCP/IP network.
5.1.1.2 Setting TCP parameters
To change the TCP parameters, select the station in question and open the
following dialog box with the ‘Change’ button.
The ‘
Parametrize NETLink PRO ETH…
’ button takes you to a new input
form that already contains the current parameters of the NETLink PRO
ETH:
If no NETLink PRO ETH can be accessed via the stated IP address, the
following message will appear:
This message can have two causes:
•
There is not NETLink PRO ETH with the stated IP address (e.g. the
device has not yet been switched on or does not boot).
•
The IP configuration of the computer used does not match the IP
configuration of the stated NETLink PRO ETH (e.g. different subnet
mask settings).
