32
NETLink PRO ETH
The entry for the security query is case-sensitive, that is, upper and lower
case must be correct.
After the security query has been correctly answered, you have write-access
to all parameters that are implemented for TCP security.
Is the TCP access list switched on by typing ‘ON’ to the field ‘
TCP access
list ON/OFF
’, only TCP connections with addresses configured in the table
entries ‘
TCP address 1
’ to ‘
TCP address 12
’ are able to communicate to the
NETLink PRO without restrictions (white list).
The pattern for a legal ip address is something like ‘
192.168.4.49
’. To delete
an ip address the pattern ‘
OFF
’ is necessary.
IP addresses without access rights are only allowed to read some information
at the web interface. Using PPI, MPI or PROFIBUS functionalities are not
possible. Also the configuration tool is not working.
Parameters of the TCP access list:
TCP access list
ON/OFF
Switch ON/OFF the functionality of the TCP
access list.
TCP/IP address
1 and 2
First and second allowed IP address.
TCP/IP address
3 and 4
Third and fourth allowed IP address.
TCP/IP address
5 and 6
Fifth and sixth allowed IP address.
TCP/IP address
7 and 8
Seventh and eighth allowed IP address.
TCP/IP address
9 and 10
Ninth and tenth allowed IP address.
TCP/IP address
11 and 12
Eleventh and twelfth allowed
IP address.
Attention: If proxy servers are reachable at the specific network, these proxy
servers should not be included to the access list. If so, a safety usage of the
NETLink PRO ETH is not guaranteed at this network.
After you have entered changes, clicking the ‘
Cancel
’ button will discard
your changes again.
!
Notice deviation by usage of
proxy servers.
