12
NETLink PRO ETH
5.1
Properties
5.1.1
Local connection (TCP parameterization)
There are three basic ways of parameterizing NETLink PRO ETH at the
TCP end:
•
Parameterization via ‘Set
PG/PC interface
Existing stations can be reparameterized using the ‘
Change
’ button
•
Parameterization via the parameterization tool ‚
NETLink PRO
Configuration
’ (see section 6).
•
Parameterization via the web interface of the NETLink PRO ETH
(see section 7.3)
If the NETLink PRO ETH is configured via the NETLink PRO driver, the
following points must be considered:
•
If the NETLink PRO ETH is active on the bus when
reparameterization is required (e.g. a variable table or block is being
viewed), reparameterization is not performed because the ensuing
reset would interrupt the NETLink PRO ETH link.
•
The NETLink PRO ETH is protected against unauthorized
reparameterization via a password (default password: “admin”).
If an attempt is made to save a parameter set with an incorrect
password, the following message is displayed:
The password query must be
answered correctly and
confirmed with OK.
