NETLink PRO ETH
29
RFC1006-specific parameters:
RFC 1006 status
Shows whether the RFC1006 is activated or not
(ON or OFF).
If RFC1006 was enabled (ON), further
parameters are visible.
- Bus autobaud
ON/OFF
Shows whether the bus parameters of the bus
system are to be determined automatically (ON)
or whether to go online with the stored
parameters (OFF).
- Own station address
Indicates the local station address. This is the
address with which the NETLink PRO ETH
will participate in the bus cycle.
- Stored bus
parameters
This indicates the stored bus parameters with
which the NETLink PRO ETH attempts to go
online if RFC1006 is enabled when autobaud is
OFF.
- Rack/slot mode
Indicates whether R/S mode (ON) or addressed
mode (OFF) is used (for details, see 8.1.4).
- Fixed destination
address for R/S mode
If R/S mode is activated, all incoming RFC1006
requests are routed to the bus address
parameterized here.
- Max. possible IP
links (RFC)
Maximum number of possible simultaneous IP
connections for RFC1006 communication.
Sum of used RFC
connections
If the NETLink PRO ETH has opened at least
one TCP or RFC1006, the exact count of open
RFC1006 connections will be displayed.
7.3
Configuration page
The configuration page, accessible via a link on the home page, is a
configuration interface for the user.
Before this page opens, it is necessary to enter the device name (
NETLink
PRO ETH
) and the password (
admin
if no user specified password is stored).
The entry for the security query is case-sensitive, that is, upper and lower
case must be correct.
i
The default password is
‘admin’.
