NETLink PRO ETH
13
•
If the password is correct and parameterization performed within the
parameterization time, the new parameter set will be saved and the
following message displayed:
NETLink PRO ETH is now restarted. This can take up to 15 seconds.
5.1.1.1 Creating a station
To able to access a NETLink PRO ETH with the NETLink PRO driver, a
station must be set up first. This station is virtual and is not stored in the
NETLink PRO ETH – it permits easier allocation if two or more NETLink
PRO ETHs are used.
The ‘
New
’ button takes you to an input dialog box in which you can store the
known IP address of an existing NETLink PRO ETH and any name for
easier assignment.
Is the desired NETLink PRO ETH behind a router (e.g. internet teleservice),
the network administrator is able to configure the router via NAT/PAT. So
all frames going to a specific port of the router going to a specific NETLink
PRO ETH behind the router.
Using this functionality makes it possible to communicate to more as one
NETLink PRO ETH behind a router, if each station gets a specific port
configuration.
Is the NETLink PRO ETH connected to the local network, the ‘Internet
teleservice’ option must be deselected.
‘
OK
’ stores this station, which can now be used.
It is easier to search for an existing NETLink PRO ETH in the local area
network. Just click the ‘
Search NETLink PRO ETH…
’ button.
!
Rebooting can take up to 15
seconds.
i
The default password is
‘admin’.
i
If NAT/PAT is used, a port
can be defined if ‘Internet
teleservice’ is selected.
