manualshive.com logo in svg

NETGEAR FVS114NA, Reference Manual

Share
Download
NETGEAR FVS114NA Reference Manual Download Page 194

Reference Manual for the ProSafe VPN Firewall FVS114

D-16

Preparing Your Network

202-10098-01, April 2005

•

The default gateway is 192.168.0.1

4.

Type 

exit

 

Configuring the Macintosh for TCP/IP Networking

Beginning with Macintosh Operating System 7, TCP/IP is already installed on the Macintosh. On 
each networked Macintosh, you will need to configure TCP/IP to use DHCP.

MacOS 8.6 or 9.x

1.

From the Apple menu, select Control Panels, then TCP/IP.

The TCP/IP Control Panel opens:

2.

From the “Connect via” box, select your Macintosh’s Ethernet interface.

3.

From the “Configure” box, select Using DHCP Server.

You can leave the DHCP Client ID box empty.

4.

Close the TCP/IP Control Panel.

5.

Repeat this for each Macintosh on your network.

MacOS X

1.

From the Apple menu, choose System Preferences, then Network.

Summary of Contents for FVS114NA





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands