manualshive.com logo in svg

NETGEAR FVS114NA, Reference Manual, Page: 195 / 212

Share
Download
NETGEAR FVS114NA Reference Manual Download Page 195

Reference Manual for the ProSafe VPN Firewall FVS114

Preparing Your Network

D-17

202-10098-01, April 2005

2.

If not already selected, select Built-in Ethernet in the Configure list.

3.

If not already selected, Select Using DHCP in the TCP/IP tab.

4.

Click 

Save

.

Verifying TCP/IP Properties for Macintosh Computers

After your Macintosh is configured and has rebooted, you can check the TCP/IP configuration by 
returning to the TCP/IP Control Panel. From the Apple menu, select Control Panels, then TCP/IP.

The panel is updated to show your settings, which should match the values below if you are using 
the default TCP/IP settings that NETGEAR recommends:

•

The IP Address is between 192.168.0.2 and 192.168.0.254

•

The Subnet mask is 255.255.255.0

•

The Router address is 192.168.0.1

If you do not see these values, you may need to restart your Macintosh or you may need to switch 
the “Configure” setting to a different option, then back again to “Using DHCP Server”.

Summary of Contents for FVS114NA





















































































































































































































Reviews:

No comments