manualshive.com logo in svg

NETGEAR FVS114NA, Reference Manual, Page: 62 / 212

Share
Download
NETGEAR FVS114NA Reference Manual Download Page 62

Reference Manual for the ProSafe VPN Firewall FVS114

5-6

Basic Virtual Private Networking

202-10098-01, April 2005

Step 1: Configuring the Client-to-Gateway VPN Tunnel on the 
FVS114

Follow this procedure to configure a client-to-gateway VPN tunnel using the VPN Wizard. 

1.

Log in to the FVS114 at its LAN address of 

http://192.168.0.1

 with its default user name of 

admin

 and password of 

password

. Click the 

VPN Wizard

 link in the main menu to display 

this screen. Click 

Next

 to proceed.

Figure 5-4:  VPN Wizard start screen

2.

Fill in the Connection Name and the pre-shared key, select the type of target end point, and 
click 

Next

 to proceed. 

Note:

 The Connection Name is arbitrary and not relevant to how the configuration functions.

Note: 

This section uses the VPN Wizard to set up the VPN tunnel using the VPNC 

default parameters listed in 

Table 5-1 on page 5-4

. If you have special requirements not 

covered by these VPNC-recommended parameters, refer to 

Chapter 6, “Advanced 

Virtual Private Networking

” to set up the VPN tunnel.

Summary of Contents for FVS114NA





















































































































































































































Reviews:

No comments