manualshive.com logo in svg

NETGEAR FVS114NA, Reference Manual, Page: 85 / 212

Share
Download
NETGEAR FVS114NA Reference Manual Download Page 85

Reference Manual for the ProSafe VPN Firewall FVS114

Basic Virtual Private Networking

5-29

202-10098-01, April 2005

Figure 5-36:  Pinging test results

Note:

 The pings may fail the first time. If so, then try the pings a second time.

Verifying the Status of a VPN Tunnel

To use the VPN Status page to determine the status of a VPN tunnel, perform the following steps:

1.

Log in to the VPN Firewall.

2.

Open the FVS114 management interface and click 

VPN Status

 under VPN to get the VPN 

Status/Log screen (

Figure 5-37

).

Figure 5-37:  VPN Status/Log screen

Log—this log shows the details of recent VPN activity, including the building of the VPN 
tunnel. If there is a problem with the VPN tunnel, refer to the log for information about what 
might be the cause of the problem. 

•

Click 

Refresh

 to see the most recent entries. 

Summary of Contents for FVS114NA





















































































































































































































Reviews:

No comments