NETGEAR FVS114NA Page 178 Reference Manual Download

Page: 178 / 212

Reference Manual for the ProSafe VPN Firewall FVS114

C-12

Virtual Private Networking

202-10098-01, April 2005

Relevant RFCs listed numerically:

•

[RFC 791]

Internet Protocol DARPA Internet Program Protocol Specification

, Information

Sciences Institute, USC, September 1981.

•

[RFC 1058]

Routing Information Protocol

, C Hedrick, Rutgers University, June 1988.

•

[RFC 1483]

Multiprotocol Encapsulation over ATM Adaptation Layer 5

, Juha Heinanen,

Telecom Finland, July 1993.

•

[RFC 2401] S. Kent, R. Atkinson,

Security Architecture for the Internet Protocol

, RFC 2401,

November 1998.

•

[RFC 2407] D. Piper,

The Internet IP Security Domain of Interpretation for ISAKMP

November 1998.

•

[RFC 2474] K. Nichols, S. Blake, F. Baker, D. Black,

Definition of the Differentiated Services

Field (DS Field) in the IPv4 and IPv6 Headers

, December 1998.

•

[RFC 2475] S. Blake, D. Black, M. Carlson, E. Davies, Z. Wang, and W. Weiss,

Architecture for Differentiated Services

, December 1998.

•

[RFC 2481] K. Ramakrishnan, S. Floyd,

A Proposal to Add Explicit Congestion Notification

(ECN) to IP

, January 1999.

•

[RFC 2408] D. Maughan, M. Schertler, M. Schneider, J. Turner,

Internet Security Association

and Key Management Protocol (ISAKMP)

•

[RFC 2409] D. Harkins, D.Carrel,

Internet Key Exchange

(IKE) protocol.

•

[RFC 2401] S. Kent, R. Atkinson,

Security Architecture for the Internet Protocol

Summary of Contents for FVS114NA





















































































































































































































Search results

Summary of Contents for FVS114NA

Reviews:

Related manuals for FVS114NA

Brands by name

Popular brands

NETGEAR FVS114NA, Reference Manual

Search results

Summary of Contents for FVS114NA

Reviews:

Related manuals for FVS114NA

Brands by name

Popular brands