NetComm INFRASTRUCTURE SERIES, User Manual

Page: 7 / 66

NP727 User’s Manual V1.00
2.2 Specification
Standard Conformance
h
Wireless:
(1) IEEE 802.11g (up to 54Mbps)
(2) IEEE 802.11b (up to 11Mbps)
h
Ethernet:
(1) 802.3
(2) 802.3u
Wireless Radio
h
Frequency band: 2.4 GHz
h
Wireless architecture:
(1) AP mode
(2) Repeater mode (WDS/Universal Repeater)
h
Modulation:
(1) 802.11b: DSSS (CCK, DBPSK, DQPSK)
(2) 802.11g: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
h
Channels:
(1) Australia (Channel 1~13)
h
Data rate with auto fallback: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, and 1 Mbps
h
Receiver Sensitivity:
(1) 802.11g: 54Mbps@-74dBm
(2) 802.11b: 11Mbps@-89dBm
h
RF output power:
(1) EU/AU: 100mW EIRP
*Note: EIRP= Transmit Power + Antenna Gain
h
Antenna: Built-in chip antenna
Wireless Signal Management
h
Max number of ESSIDs (Virtual APs): 8
h
Max number of associated clients per AP: 32
h
Setting for maximum number of associated clients
h
Network policy based on ESSID
QoS & WMM
h
DiffServ / TOS
h
IEEE 802.1p/ COS
h
IEEE 802.1Q Tag VLAN priority control
h
IEEE 802.11e WMM
Handover & Roaming
h
IEEE 802.11f IAPP
h
IEEE 802.11i pre-auth (PMKSA cache)
h
L2 Roaming