NP727 User’s Manual V1.00
Step 5 (CONT). Check WDS Link Status
h
Click on the
Status
button.
h
Select
the
Repeater
tab.
h
Check the signal strength of WDS link(s)
：
Upon the completion of Step 5, there shall be
RSSI
displayed on the
WDS Link Status
. If the RSSI is
shown as
N/A
, check if the wiring is properly connected and please ensure the accurate execution of
Step 5 as described above.
Congratulations!
The NP727 is now installed and configured successfully.
•
It is strongly recommended to make a backup copy of configuration settings.
•
After the NP727's network configuration is completed, please remember to change the IP Address of
your PC Connection Properties back to its original settings in order to ensure that your PC functions
properly in its real network environments.
Summary of Contents for INFRASTRUCTURE SERIES
Page 1: ...NetComm INFRASTRUCTURE Series In wall Wireless Access Point USER GUIDE...
Page 3: ...NP727 User s Manual V1 00 4 5 3 Repeater Information 62 4 5 4 Event Log 61 4 6 Online Help 62...
Page 13: ...NP727 User s Manual V1 00 Step 4 Cover it with faceplate...
Page 51: ...NP727 User s Manual V1 00 Layer 2 Firewall Overview Check State...
