NetComm INFRASTRUCTURE SERIES, User Manual

Page: 42 / 66

NP727 User’s Manual V1.00
- You must enable WMM in the NP727.
- You must enable WMM in the wireless adapter in your computer.
y
IAPP : The default is Disable . IAPP (Inter Access Point Protocol) is a protocol by which access points share
information about the stations that are connected to them. By enabling this function, the NP727 will
automatically broadcast information of associated wireless stations to its peer access points. This will help
wireless stations roam smoothly among IAPP-enabled access points in the same wireless LAN.
y
802.11g Protection: When enabled, the associated 802.11g stations will benefit from this function since their
transmission speed will not be affected by the surrounding 802.11b stations.