NP727 User’s Manual V1.00
4.5.3 Repeater Information
The administrator can review detailed information of the repeater function on this page. Information of
repeater’s status, mode and encryption is provided
•
Repeater Status:
The table will be displayed when Repeater mode
is
selected.
¾
Status:
The status of the repeater function either
Enabled
or
Disabled
.
¾
Mode:
The mode selected for the repeater function, either
Universal Repeater
or
WDS
.
¾
Encryption:
The encryption type used:
None
,
WEP
, or
WPA-PSK
.
•
WDS Link Status:
The table will be displayed when WDS mode
is
selected. For more information on the
repeater type, please refer to
Section 4.2.5 Repeater Settings
.
¾
MAC Address:
The MAC Address of the WDS peer.
¾
RSSI:
Received Signal Strength Indication, a measurement of received radio signal over WDS link.
¾
Tx Rate:
The transmit rate of the Repeater.
¾
Tx Count:
The accumulative number of transmission counts.
¾
Tx Error:
The accumulative number of transmission errors.
< Fig. 4.5.3-1 Repeater Information: WDS Page>
Summary of Contents for INFRASTRUCTURE SERIES
Page 1: ...NetComm INFRASTRUCTURE Series In wall Wireless Access Point USER GUIDE...
Page 3: ...NP727 User s Manual V1 00 4 5 3 Repeater Information 62 4 5 4 Event Log 61 4 6 Online Help 62...
Page 13: ...NP727 User s Manual V1 00 Step 4 Cover it with faceplate...
Page 51: ...NP727 User s Manual V1 00 Layer 2 Firewall Overview Check State...
