NetComm INFRASTRUCTURE SERIES User Manual Download

Page: 57 / 66

NP727 User’s Manual V1.00

4.3.4 System Upgrade

THE NP727 provides Web firmware upload/upgrade feature. The administrator can download the latest firmware

from the website and save it on the administrator PC. To upgrade the system firmware, click

Browse

to choose the

new firmware file you downloaded onto the temporary directory of your PC and then click

Upload

to execute the

process. There will be a prompt confirmation message appearing to notify the administrator to restart the system

after a successful firmware upgrade. Please restart the system after upgrading the firmware.

Note:

•

It is recommended to check the firmware version number before proceeding further. Please

make sure you have the correct firmware file.

•

Firmware upgrade may sometimes result in loss of some data. Please ensure that all necessary

settings are written down before upgrading the firmware.

•

During firmware upgrade, please do not turn off the power. This may permanent damage this

system.

For further information of available firmware version, please contact your local dealers.

Summary of Contents for INFRASTRUCTURE SERIES



































































Search results

Summary of Contents for INFRASTRUCTURE SERIES

Reviews:

Related manuals for INFRASTRUCTURE SERIES

Brands by name

Popular brands

NetComm INFRASTRUCTURE SERIES, User Manual

Search results

Summary of Contents for INFRASTRUCTURE SERIES

Reviews:

Related manuals for INFRASTRUCTURE SERIES

Brands by name

Popular brands