NetComm INFRASTRUCTURE SERIES, User Manual

Page: 26 / 66

NP727 User’s Manual V1.00
3. Web Interface Configuration
This chapter will guide you through further detailed settings. The following table shows all the UI functions of the
NP727 In-wall Wireless Access Point. In the web management interface, there are two main interface areas: Main
Menu and Working Area . The Working Area occupies the largest area of the web management interface,
displayed in the center of the interface. It is also referred as the configuration page . The web management
interface is the page where status is displayed, control is issued and parameters are configured. The Main Menu ,
on the top of the web management interface, allows the administrator to traverse to various management functions
of this system. The management functions are grouped into branches: System , Wireless , Firewall , Utilities, and
Status .
OPTION FUNCTION
System Information
Network Settings System
Management Services
Virtual AP Overview
General Settings
VAP Configuration
Security Settings
Repeater Settings
Advanced Wireless Settings
Access Control Settings
Wireless
Site Survey
Layer 2 Firewall Settings
Firewall Service Firewall
Advanced Firewall Settings
Change Password
Network Utilities
Configuration Save & Restore
System Upgrade
Utilities
Reboot
System Overview
Associated Client Status
Repeater Information
Status
Event Log
Note:
On each and every configuration page, you may click SAVE to save the changes, but you must
reboot the system upon the completion of all configuration settings for the changes to take effect.
When clicking SAVE , the following message will appear: “Some modifications have been saved
and will take effect after Reboot.” <All on-line users will be disconnected during
reboot/restart.>