NP727 User’s Manual V1.00
3.3 Basic
Configuration
The NP727 supports web-based configuration. Upon the completion of the hardware installation, the NP727 can be
configured through a PC by using its web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0 and
the above.
The default values of the LAN IP address and subnet mask of the NP727 are:
IP Address: 192.168.27.1
Subnet Mask: 255.255.255.0
•
To access the web management interface, connect the administrator PC to the LAN port of the NP727 via an
Ethernet cable. Then, set a static IP address on the same subnet mask as the NP727 in the TCP/IP of your PC,
such as the following example (Please note that the IP address used shall not be duplicated with the IP
address of other devices within the same network.):
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
•
Launch the web browser on your PC by entering the IP address of the NP727 (
http://192.168.27.1
) in the
address field, and then press
Enter
. The following Administrator Login Page will then appear. Enter
“admin”
for both the
User name
and
Password
fields, and then click
Login
to log in.
User name: “admin”
Password: “admin”
•
After a successful login into the NP727, a
System Overview
page of the web management interface will
appear. To logout, simply click on the
Logout
button in the upper right hand corner of the interface to return to
the Administrator Login Page.
Summary of Contents for INFRASTRUCTURE SERIES
Page 1: ...NetComm INFRASTRUCTURE Series In wall Wireless Access Point USER GUIDE...
Page 3: ...NP727 User s Manual V1 00 4 5 3 Repeater Information 62 4 5 4 Event Log 61 4 6 Online Help 62...
Page 13: ...NP727 User s Manual V1 00 Step 4 Cover it with faceplate...
Page 51: ...NP727 User s Manual V1 00 Layer 2 Firewall Overview Check State...
