NP727 User’s Manual V1.00
Step 5. Configure WDS (Wireless Distribution System) Settings
To extend its wireless coverage, the NP727 is capable of creating WDS links for connection to other WDS-capable
APs (peer APs). The NP727 supports up to 4 WDS links; by default, all WDS profiles are disabled.
h
Click on the
Repeater
tab.
h
Select
WDS
from the drop-down list of Repeater Type.
h
Configure WDS link parameters:
(a) Select
preferred
Security Type
(b)
Enter MAC Address of Remote AP
(peer AP) and click Add
h
To
configure
peer
AP(s):
After completing the WDS settings for the NP727 (functioning as a “primary WDS station”), you must
also configure the settings of its peer AP(s).
If you use another NP727 as the peer AP, simply repeat the above-mentioned steps with the MAC
Address of the primary WDS station for setting WDS link parameters of the peer AP(s).
Summary of Contents for INFRASTRUCTURE SERIES
Page 1: ...NetComm INFRASTRUCTURE Series In wall Wireless Access Point USER GUIDE...
Page 3: ...NP727 User s Manual V1 00 4 5 3 Repeater Information 62 4 5 4 Event Log 61 4 6 Online Help 62...
Page 13: ...NP727 User s Manual V1 00 Step 4 Cover it with faceplate...
Page 51: ...NP727 User s Manual V1 00 Layer 2 Firewall Overview Check State...
