![NetApp SGF6024 Hardware Installation And Maintenance Manual Download Page 93](http://html1.mh-extra.com/html/netapp/sgf6024/sgf6024_hardware-installation-and-maintenance-manual_1669960093.webp)
Related tasks
Replacing a storage controller
Related information
NetApp E-Series Systems Documentation Center
Replacing hardware components in the optional 60-drive
expansion shelf
You might need to replace an input/output module, a power supply, or a fan in the expansion shelf.
Before you begin
You have the E-Series hardware replacement procedure.
About this task
To replace an input/output module (IOM) in a 60-drive expansion shelf, see the instructions in this
guide for replacing a storage controller.
To replace a power supply or a fan in a 60-drive expansion shelf, access the E-Series procedures for
maintaining 60-drive hardware.
FRU
See E-Series instructions for
Input/output module (IOM)
Replacing an IOM
Power canister
Replace power canister (60-drive)
Fan canister
Replace fan canister (60-drive)
Replacing the SG6000-CN controller
You might need to replace the SG6000-CN controller if it is not functioning optimally or if it has
failed.
Before you begin
•
You have a replacement controller with the same part number as the controller you are replacing.
•
You have labels to identify each cable that is connected to the controller.
About this task
The appliance Storage Node will not be accessible when you replace the SG6000-CN controller. If
the SG6000-CN controller is functioning sufficiently, you can perform a controlled shutdown at the
start of this procedure.
Note:
If you are replacing the controller before installing StorageGRID software, you might not be
able to access the StorageGRID Appliance Installer immediately after completing this procedure.
While you can access the StorageGRID Appliance Installer from other hosts on the same subnet as
the appliance, you cannot access it from hosts on other subnets. This condition should resolve
itself within 15 minutes (when any ARP cache entries for the original controller time out), or you
can clear the condition immediately by purging any old ARP cache entries manually from the local
router or gateway.
Maintaining the SG6000 appliance | 93
Summary of Contents for SGF6024
Page 2: ......