5. When you are satisfied with your selections, click Save.
Note:
You might lose your connection if you made changes to the network or link you are
connected through. If you are not reconnected within 1 minute, re-enter the URL for the
StorageGRID Appliance Installer using one of the other IP addresses assigned to the appliance:
https://SG6000-CN_Controller_IP:8443
Related concepts
Port bond modes for the SG6000-CN controller
on page 23
Configuring StorageGRID IP addresses
You use the StorageGRID Appliance Installer to configure the IP addresses and routing information
used for the appliance Storage Node on the StorageGRID Grid, Admin, and Client Networks.
About this task
You must either assign a static IP for the appliance on each connected network or assign a permanent
lease for the address on the DHCP server.
Additionally, if you want to change the link configuration of a StorageGRID appliance, see the
instructions for changing the link configuration of the SG6000-CN controller.
Steps
1. From the menu bar of the StorageGRID Appliance Installer, click Configure Networking > IP
Configuration.
The IP Configuration page appears. This example shows the Grid Network section of the page
with IP Assignment set to DHCP.
Configuring the hardware | 53
Summary of Contents for SGF6024
Page 2: ......
