6. Secure the enclosure to the back of the rails by inserting two M5 screws through the brackets at
the enclosure and the rail kit bracket.
7. If applicable, replace the shelf end caps or the system bezel.
SG6000-CN: Installing into a cabinet or rack
You must install a set of rails for the SG6000-CN controller in your cabinet or rack, and then slide
the controller onto the rails.
Before you begin
•
You have reviewed the Safety Notices document included in the box, and understand the
precautions for moving and installing hardware.
•
You have the instructions packaged with the rail kit.
•
You have installed the E2860 controller shelf and drives or the EF570 controller shelf.
36 | Hardware Installation and Maintenance Guide for SG6000 Appliances
Summary of Contents for SGF6024
Page 2: ......
