Related tasks
Setting the IP addresses for the storage controllers
on page 58
Related references
on page 22
Setting up SANtricity System Manager
After accessing SANtricity System Manager, you can use it to configure hardware settings. Typically,
you configure these settings before deploying the appliance as a Storage Node in a StorageGRID
system.
About this task
You use SANtricity System Manager to configure the following settings:
•
Email alerts, SNMP alerts, or syslog alerts for the components in the storage controller shelf
•
AutoSupport settings for the components in the storage controller shelf
•
Drive Security keys, which are needed to unlock secured drives (this step is required if the Drive
Security feature is enabled)
•
Administrator password for accessing SANtricity System Manager
Steps
1. Open a web browser on a management client, and enter the URL for SANtricity System Manager:
https://Storage_Controller_IP
Configuring the hardware | 61
Summary of Contents for SGF6024
Page 2: ......
