Information needed
Your value for controller
A
Your value for controller
B
Ethernet switch port you will
connect to management port 1
(labeled as P1 on the controller)
MAC address for management port
1 (printed on a label near port P1)
DHCP-assigned IP address for
management port 1, if available after
power on
Note:
If the network you will
connect to the storage controller
includes a DHCP server, the
network administrator can use the
MAC address to determine the IP
address that was assigned by the
DHCP server.
Static IP address you plan to use for
the appliance on the management
network
For IPv4:
•
IPv4 address:
•
Subnet mask:
•
Gateway:
For IPv6:
•
IPv6 address:
•
Routable IP address:
•
storage controller router
IP address:
For IPv4:
•
IPv4 address:
•
Subnet mask:
•
Gateway:
For IPv6:
•
IPv6 address:
•
Routable IP address:
•
storage controller router
IP address:
IP address format
Choose one:
•
IPv4
•
IPv6
Speed and duplex mode
Note:
You must make sure the
Ethernet switch for the SANtricity
System Manager management
network is set to autonegotiate.
Must be:
•
Autonegotiate (default)
Table 2: Information needed to connect the SG6000-CN controller to the Admin
Network
The Admin Network for StorageGRID is an optional network, used for system administration and
maintenance. The appliance connects to the Admin Network using the following 1-GbE management
ports on the SG6000-CN controller.
26 | Hardware Installation and Maintenance Guide for SG6000 Appliances
Summary of Contents for SGF6024
Page 2: ......
