3. Enter a new password for the root account in the two fields provided.
4. Click Save.
Setting the IP address for the BMC management port
Before you can access the BMC interface, you must configure the IP address for the BMC
management port on the SG6000-CN controller.
Before you begin
•
The management client is using a supported web browser.
•
You are using any management client that can connect to a StorageGRID network.
•
The BMC management port is connected to the management network you plan to use.
About this task
Attention:
For support purposes, the BMC management port allows low-level hardware access.
You should only connect this port to a secure, trusted, internal management network. If no such
network is available, leave the BMC port unconnected or blocked, unless a BMC connection is
requested by technical support.
Steps
1. From the client, enter the URL for the StorageGRID Appliance Installer:
https://SG6000-CN_Controller_IP:8443
For
SG6000-CN_Controller_IP
, use the IP address for the appliance on any StorageGRID
network.
The StorageGRID Appliance Installer Home page appears.
2. Select Configure Hardware > BMC Configuration.
Configuring the hardware | 65
Summary of Contents for SGF6024
Page 2: ......
