Ness Premium H.264 DVR, Setup Manual

Page: 71 / 106

User’s Manual
71
Configuration
The Configuration menu can be used to restore the default factory settings, import and
export configuration. Select <Configuration> from the Main menu and press ENTER. The
following menu is displayed. Items in this menu are described in the following subsections.
Configuration
1. Load Factory Default
2. Import Config
3. Export Config No
< Load Factory Default >
This item is used to load the factory setting. Select <Yes> to recall the factory default setup
configuration from the read-only memory, or <No> to cancel.
< Import Configuration >
This item allows users to load a unit configuration that was saved in an external drive. To
import a configuration that was previously exported, make sure the device that saved the
configuration is connected to the unit. Select <Import Config> from the Configuration menu
and press ENTER. The following menu is displayed.
Import Config
Config Name
xxxx-xxxx
xxx-xx Select
No
No
Press UP / DOWN to select one of the listed available configuration files, and choose
<Yes> to start import.
NOTE:
If the imported configuration has different record mode from the unit’s, the
warning message “This config has different record mode. This will FORMAT ALL
HARDDISKS.” will show.
NOTE:
Remove the ThumbDrive
®
used for importing configuration after the unit
restarts, or it will be formatted as well.