background image

User’s Manual

 

 

10

< Key Usage >                                                                               

The key usage differs under the OSD setup menu and in the Virtual keyboard. The 
difference can be seen while setting some items, such as Unit Name and IP Address, in the 
OSD setup menu. 
 

„

 

Key Usage in OSD Setup Menu 

Below introduce some keys used frequently to set up the unit via the OSD 
setup menu. 
 

<Direction Key> 

In the OSD setup menu, Direction keys are used to move the cursor to 
previous or next fields. UP / DOWN are used to change the value in the 
selected field. 

 

<ENTER> 

In OSD setup menu or selection interface, press the key to make selection or 
save settings. 
 

<ESC> 

Press to cancel or exit from certain OSD setup menu without saving any 
changes. 
 

„

 

Key Usage in Virtual Keyboard 

A virtual keyboard shows when edit the settings, such as camera title, e-mail 
address, etc. The virtual keyboard displays as follows. 
 

 

 

 

 

A B C D E F G H I J K L M

N  O  P  Q R S T U V W X Y Z

a b c d e f g h i

j k l m

n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9

.

! @

 _  ,

” + = *

 

 

 

Backspace   Delete 

  Cancel

OK 

 

 

Summary of Contents for Premium H.264 DVR











































































































Reviews: