Ness Premium H.264 DVR, Setup Manual

Page: 26 / 106

User’s Manual
26
•
When finished, move the cursor to <OK> and press ENTER to
complete the setting; or, abort the setting by either ways: press
ESC, or move the cursor to <Cancel> and press ENTER.
- Network Authentication
For additional security on the wireless network, the Authentication
type can also be set when Encryption is enabled.
If <Shared> is chosen, your Access Point will not be available on the
wireless network except to those wireless clients that share the same
WEP (short for Wired Equivalent Privacy) key.
If <Open> System is chosen, only those wireless clients with the
same WEP key will be able to communicate on the wireless network,
but the Access Point will be visible to all devices on the network.
NOTE:
Wired Equivalent Privacy is a security protocol for
WLANs defined in the 802.11b standard. WEP aims to
provide security by encrypting data over radio waves so that it
is protected when the data is transmitting from one end point
to another.
- Data Encryption
This function is used to translate the data into a secret code. Data
encryption is the most efficient way to achieve data security. To read
an encrypted file, you must have access to a secret key or password
that enables you to decrypt it.
Once you enable this function, you have to specify the secret key
level (64 bits or 128 bits) and key index.