manualshive.com logo in svg

Ness Premium H.264 DVR, Setup Manual

Share
Download
Ness Premium H.264 DVR Setup Manual Download Page 103

User’s Manual 

     

 

103 

Appendix E: HDD COPY TOOL (EXT2IFS)

                 

 

The data system of the DVR’s HDD is totally different from Windows

®

 based PC. So if users 

just simply plug the HDD onto the PC, the PC will not recognize its existence. Hence, in 

order to access data from the DVR’s HDD, users will need a special HDD Copy Tool driver 

called EXT2IFS. This appendix section will introduce how to download, install, and setup 

EXT2IFS and the DVR’s HDD.   

 

Installation of the DVR’s HDD

 

EXT2IFS can be found on the website: 

http://uranus.it.swin.edu.au/~jn/linux/ext2ifs.htm

. A 

detailed description about the driver can also be found. Plug in the DVR’s HDD to the PC, 

then follow the steps below. 

 

Step 1. 

Download EXT2IFS to the PC from the website listed above. 

 

Step 2. 

Extract the EXT2IFS driver that was just downloaded. Open the extracted folder 

and double click on “service.exe”, and the window below will be displayed.   

 

 

Step 3. 

Click <Step 1>, then choose <Install to SystemRoot> and <Start driver on boot> 

options, as shown below. Then, click <Install Driver> button. 

 

1

2

3

4

Summary of Contents for Premium H.264 DVR











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands