manualshive.com logo in svg

Necta brio 3, Programming Manual

Share
Download
Necta brio 3 Programming Manual Download Page 39

P2595EN01

08 - 2007

TECHnICIAn MEnu

34

4 - TEST

4.1 - TEST DISPENSING

4.1.1 - COMP. DISPENSING

4.1.2 - WATER ONLY

4.1.3 - POWDER ONLY

4.1.4 - NO ACCESSORIES

4.1.5 - ACCESSORIES ONLY

4.  

t

est

4.1  

t

est

 

dIsPensIng

4.1.1  

c

omPlete

 

dIsPensIng

With this function it is possible to obtain, with the door open 

and without inserting any money, complete dispensing for each 

selection.

4.1.2  

d

IsPensIng

 

water

 

only

With this function it is possible to dispense, with the door open 

and without inserting any money, only the water doses for each 

selection.

4.1.3  

d

IsPensIng

 

Powder

 

only

With this function it is possible to dispense, with the door open 

and without inserting any money, only the powder doses for each 

selection.

4.1.4 

wIthout

 

accessorIes

With this function it is possible to dispense, with the door open and 

without inserting any money, only the water and powder doses for 

each selection, without any cup and stirrer.

4.1.5 

accessorIes

 

only

With this function it is possible to dispense, with the door open 

and without inserting any money, only the accessories for each 

selection.

Summary of Contents for brio 3






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands