P2595EN01
08 - 2007
TECHnICIAn MEnu
25
2.6.4 - ENERGY SAVING
2.6.4.1 - SET ENER. SAVING
2.6.4.2 - PARAM. EN.SAVING
2.6.5 - GRUPPO ES
2.6.6 - LAV. GRUPPO AUT.
2.6.4
e
nergy
savIng
This function is used for saving electric power when the machine is
not in use.
2.6.4.1
s
ettIng
the
energy
savIng
This function is used for enabling or disabling the automatic switch-
off of the vending machine boiler during the time when it is believed
the machine would not be used.
2.6.4.2
e
nergy
savIng
Parameters
This function is used for setting the days of the week (1 Monday,
2 Tuesday, 3 Wednesday, etc.) and the time bands (band 1 and 2)
when the boiler is to be switched off for energy saving.
2.6.5
e
sPresso
u
nIt
This function is used for setting the standby position of the Z3000
espresso unit.
- OPEN
brewing chamber open;
- CLOSED
brewing chamber closed.
By default the position is set to OPEN.
2.6.6
a
utomatIc
unIt
wash
This function is used for setting the daily unit wash of the espresso
unit by setting the time when it is to be performed. If setting the time
to 00.00 the function is disabled.
2.6.7 - FAN CONTROL
2.6.7
e
xhauster
control
This function is used for setting the continuous operation of the
exhauster fans for instant products:
- ON fans always on;
- OFF fans on only during dispensing and for the following 30
seconds.
2.6.8 - BREWER WARMING
2.6.8
e
sPresso
unIt
heatIng
This function is used for setting the espresso coffee based selection
for which the brewer unit heating must be enabled, permitting the
dispensing of hot water in the brewer unit before brewing the coffee.
2.6.9 - BREW. WARM. TIME
2.6.9
e
sPresso
unIt
heatIng
tIme
This function is used for setting the length of time from the last es-
presso coffee selection after which the brewer unit heating must be
performed (30 minutes by default).
