P2595EN01
08 - 2007
TECHnICIAn MEnu
14
2.1.4 - MASTER SLAVE
2.1.4.1 - SET UP
2.1.4
m
aster
s
lave
The machine control system is pre-arranged for the connection in a
bank of vending machines (Minisnakky, Snakky and Snakky SL)
2.1.4.1
s
ettIngs
This function is used for setting the hierarchies of master/slave rela
-
tionships between connected vending machines.
This machine can be configured a “Master”, i.e. having control over
the second machine, or as “Slave”, i.e. leaving the control to the
other machine.
2-digit (XX) or 3-digit (0XX; 9XX) selection numbers will also be set.
The master/slave function is not enabled by default.
2.1.4.2 - SLAVE PRICE HOLD
2.1.4.2
s
lave
P
rIce
h
oldIng
(e
xe
. P
rotocol
)
In the event an Executive payment system in “Price Holding” mode
is set, this function is used for setting the same mode also in the
software of the slave machine.
2.1.4.3 - VIRT. PRICE RET.
2.1.4.3
v
Irtual
P
rIce
r
eturn
(exe. / bdv P
rotocol
)
In the case of combined or virtual selections (with the related menus
present in the slave machines), this function is used for setting
whether to keep (OFF) or not (ON) the partial amount, should the
second selection/dispensing fail.
2.1.4.4 - RESET SNAKKY SL
2.1.4.4
Reset snakky sl
This function is used for resetting all settings related to the master/
slave function on the slave machine.
2.1.4.5 - MONITOR SLAVE
2.1.4.5
m
onItor
s
lave
This function is used for scrolling through all the information of a
slave being connected.
When switching on the slave with the display showing this function,
the display will indicate in a sequence all information on the slave
regarding:
- software version
- type of slave (XX, 0XX, 9XX)
- presence of dispensing detection photocells
- number of trays and compartments
- presence of dispensing compartment lock device
- temperature detected by the internal probe
To exit the function it will be necessary to switch the master machine
off.
