manualshive.com logo in svg

Necta brio 3, Programming Manual

Share
Download
Necta brio 3 Programming Manual Download Page 13

P2595EN01

08 - 2007

FILLER MEnu

8

4 - BOILER TEMPERAT.

5 - TEST

5.1 - COMP. DISPENSING

5.2 - WATER ONLY

4  

b

oIler

 

temPerature

This function is used for displaying the operating temperature, ex-

pressed in °C, of the boilers actually installed in the machine.

5  

t

est

5.1  

c

omPlete

 

dIsPensIng

With this function it is possible to obtain, with the door open 

and without inserting any money, complete dispensing for each 

selection.

5.2  

w

ater

 

only

With this function it is possible to dispense, with the door open 

and without inserting any money, only the water doses for each 

selection.

5.3  

P

owder

 

only

With this function it is possible to dispense, with the door open 

and without inserting any money, only the powder doses for each 

selection.

5.3 - POWDER ONLY

5.4 - NO ACCESSORIES

5.5 - ACCESSORIES ONLY

5.4 

n

o

 

accessorIes

With this function it is possible to dispense, with the door open and 

without inserting any money, only the water and powder doses for 

each selection, without any cup and stirrer.

5.5 

a

ccessorIes

 

only

With this function it is possible to dispense, with the door open 

and without inserting any money, only the accessories for each 

selection.

Summary of Contents for brio 3






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands