P2595EN01
08 - 2007
TECHnICIAn MEnu
15
2.2 - SELECTIONS
2.2.1 - SET WATER
2.2.1.1 - WATER DOSES
2.2.1.2 - SET WHIP DOSES
2.2.1.2.1 - SET DOSES
2.2.1.2.2 - SET MODALITY
2.2
s
electIons
2.2.1
s
ettIng
the
water
2.2.1.1
w
ater
doses
With this function the water doses that compose the drink can be
set for each selection button.
These are expressed in:
- cc for instant products;
- fmp (number of pulses of the volumetric counter) for Espresso
(coffee or tea).
The display will indicate the number of the water dose being set
(water 1, water 2, etc.) and the water value blinking. In order to verify
the correspondence between the water doses refer to the “Selection
dose table”.
2.2.1.2
s
ettIng
the
whIPPer
2.2.1.2.1
s
ettIng
the
whIPPer
doses
The whipping time can be set for each selection button, for each
water dose that composes such selection.
The duration can be set in two different modes:
2.2.1.2.2
s
ettIng
the
whIPPer
mode
It is possible to choose between two different modes:
Absolute
i.e. independent from the solenoid valve opening time. The whip-
ping duration is set as tenths of a second for Instant models and as
volumetric counter pulses for Espresso models.
Relative
i.e. based on the difference, plus or minus, from the moment the
solenoid valve closes.
The whipping duration is always expressed in tenths of a second.
