NEC VERSA P, Service Manual

Page: 54 / 177

Setup and Operation 2-15
USING AUTO SETUP TO SELECT PARAMETERS
Use the steps below to review or change system parameters.
1. When no error messages exist, choose a parameter option from the menu bar by
pressing the appropriate highlighted character in the menu.
To select “Comms” press
C
. A window shows a parameter menu and the pa-
rameter's current setting. Go to step 3.
If an error message occurred during POST, use Auto Setup as follows:
n
Note the blinking double carets (>>) that mark the changed parameter(s).
n
Either accept the change(s) by pressing
Enter
and return to the Auto Setup
Summary screen, or
n
Change the parameter to the correct setting using the steps that follow.
2. Press
Tab
or the arrow keys to place the cursor on the parameter.
3.
Press the Alt
↓↓
to view the parameter settings. A list of parameter choices ap-
pears.
To select a setting, press
Alt
↓↓
to position the cursor on the appropriate setting.
Press
Enter
. Auto Setup processes the change, exits the window and returns to
the parameter menu.
Press
Esc
to return to the summary screen without saving changes.
4. Press
X
to exit the menu bar.
5.
Use
↓↓
to select “Exit and Save Changes” and press Enter .
6.
Press
Enter
again. The system reboots with the latest changes.